I have a second iSCSI SAN which we are going to use as a Test Sandbox.
I have no idea on what I need to do to get this to work. I tried adding it to the Dynamic Discovery but that did not work.
The existing configuration is as follows.
vSwitch 2
VmKernel Port iSCSi1 vmk1: 192.168.x.29 to vmnic0
vSwitch3
VMkernel Port iSCSI2 vmk2: 192.168.x.30 to vmnic5
Just guessing do I add two new Standard vSwitches (3 and 4) and give each a storage IP address of 192.168.x.32 and 192.168.x.33 and point one to vmnic0 and the other to vmnic5?
Will that conflict with the existing SAN traffic? Currently we are running 1Gig switches but are planning on upgrading to 10Gig for the iSCSI side.
Also should the vmnic's have been teamed instead of each one being separate?
Both SAN's are on the same iSCSI subnet.